Special features
of the Circle Punch

The hot stamped pattern will allow you to create the continuous effects of the various designs on the circle line

There are two different sized cuts with each/one punch

How to use the Circle Punch
1) Use the Circle Cut Guide to cutthe paper  for a 6" (or 4") circle.

2)Closely set the 6" (4") circle paper against the back wall on the 6" (4") marked base and press teh button

3)Turn the paper to the left (6") or right (4") until the punched design identically matches the hot-stamped pattern on the base

4) repeat step 3 for more for more cuts in line

How to use the Circle Cut Guide -(CCG)
1) Lay the CCGon the paper to cut and pin the paper through the pin hole.

2) Place the blade holder onto the start line

3)Insert the cutting blade into the blade holder and styart cutting th epaper following the track

4) afdter completing half the circle turn the paper 180 degrees and repeart steps 2 & 3.

Its as easy as that to make these stunning paper patterns!